VGCREATE(8) System Manager's Manual VGCREATE(8)
NAME
vgcreate -- create a volume group
SYNOPSIS
vgcreate [--addtag Tag] [--alloc AllocationPolicy] [-A|--autobackup
{y|n}] [-c|--clustered {y|n}] [--commandprofile ProfileName]
[-d|--debug] [-h|--help] [-l|--maxlogicalvolumes MaxLogicalVolumes]
[-M|--metadatatype type] [--metadataprofile ProfileName] [-p|--maxphys-
icalvolumes MaxPhysicalVolumes] [--[vg]metadatacopies NumberOf-
Copies|unmanaged|all] [-s|--physicalextentsize PhysicalExtent-
Size[bBsSkKmMgGtTpPeE]] [-t|--test] [-v|--verbose] [--version] [PHYSI-
CAL DEVICE OPTIONS] VolumeGroupName PhysicalDevicePath [PhysicalDevi-
cePath...]
DESCRIPTION
vgcreate creates a new volume group called VolumeGroupName using the
block special device PhysicalDevicePath.
If PhysicalDevicePath was not previously configured for LVM with pvcre-
ate(8), the device will be initialized with the same default values
used with pvcreate(8). If non-default pvcreate values are desired,
they may be given on the commandline with the same options as pvcre-
ate(8). See PHYSICAL DEVICE OPTIONS for available options. Note that
the restore-related options such as --restorefile, --uuid and --physi-
calvolumesize are not available. If a restore operation is needed, use
pvcreate(8) and vgcfgrestore(8).
OPTIONS
See lvm(8) for common options.
-c, --clustered {y|n}
If clustered locking is enabled, this defaults to y indicating
that this Volume Group is shared with other nodes in the clus-
ter.
If the new Volume Group contains only local disks that are not
visible on the other nodes, you must specify --clustered n. If
the cluster infrastructure is unavailable on a particular node
at a particular time, you may still be able to use such Volume
Groups.
-l, --maxlogicalvolumes MaxLogicalVolumes
Sets the maximum number of logical volumes allowed in this vol-
ume group. The setting can be changed with vgchange(8). For
volume groups with metadata in lvm1 format, the limit and
default value is 255. If the metadata uses lvm2 format, the
default value is 0 which removes this restriction: there is then
no limit.
-p, --maxphysicalvolumes MaxPhysicalVolumes
Sets the maximum number of physical volumes that can belong to
this volume group. The setting can be changed with vgchange.
For volume groups with metadata in lvm1 format, the limit and
default value is 255. If the metadata uses lvm2 format, the
value 0 removes this restriction: there is then no limit. If
you have a large number of physical volumes in a volume group
with metadata in lvm2 format, for tool performance reasons, you
should consider some use of --pvmetadatacopies 0 as described in
pvcreate(8), and/or use --vgmetadatacopies.
--[vg]metadatacopies NumberOfCopies|unmanaged|all
Sets the desired number of metadata copies in the volume group.
If set to a non-zero value, LVM will automatically manage the
'metadataignore' flags on the physical volumes (see pvcreate(8)
or pvchange --metadataignore) in order to achieve NumberOfCopies
copies of metadata. If set to unmanaged, LVM will not automati-
cally manage the 'metadataignore' flags. If set to all, LVM
will first clear all of the 'metadataignore' flags on all meta-
data areas in the volume group, then set the value to unmanaged.
The vgmetadatacopies option is useful for volume groups contain-
ing large numbers of physical volumes with metadata as it may be
used to minimize metadata read and write overhead. The default
value is unmanaged.
--metadataprofile ProfileName
Uses and attaches the ProfileName configuration profile to the
volume group metadata. Whenever the volume group is processed
next time, the profile is automatically applied. The profile is
inherited by all logical volumes in the volume group unless the
logical volume itself has its own profile attached. See
lvm.conf(5) for more information about metadata profiles.
-s, --physicalextentsize PhysicalExtentSize[bBsSkKmMgGtTpPeE]
Sets the physical extent size on physical volumes of this volume
group. A size suffix (k for kilobytes up to t for terabytes) is
optional, megabytes is the default if no suffix is present. The
value must be at least 1 sector for LVM2 format (where the sec-
tor size is the largest sector size of the PVs currently used in
the VG) or 8KiB for LVM1 format and it must be a power of 2. The
default is 4 MiB.
Once this value has been set, it is difficult to change it with-
out recreating the volume group which would involve backing up
and restoring data on any logical volumes. However, if no
extents need moving for the new value to apply, it can be
altered using vgchange -s.
If the volume group metadata uses lvm1 format, extents can vary
in size from 8KiB to 16GiB and there is a limit of 65534 extents
in each logical volume. The default of 4 MiB leads to a maximum
logical volume size of around 256GiB.
If the volume group metadata uses lvm2 format those restrictions
do not apply, but having a large number of extents will slow
down the tools but have no impact on I/O performance to the log-
ical volume. The smallest PE is 1KiB
The 2.4 kernel has a limitation of 2TiB per block device.
PHYSICAL DEVICE OPTIONS
The following options are available for initializing physical devices
in the volume group. These options are further described in the pvcre-
ate(8) man page.
-f, --force
-y, --yes
-Z, --zero {y|n}
--labelsector sector
--metadatasize size
--pvmetadatacopies copies
--dataalignment alignment
--dataalignmentoffset alignment_offset
Examples
Creates a volume group named "test_vg" using physical volumes
"/dev/sdk1" and "/dev/sdl1" with default physical extent size of 4MiB:
vgcreate test_vg /dev/sdk1 /dev/sdl1
SEE ALSO
lvm(8), pvdisplay(8), pvcreate(8), vgdisplay(8), vgextend(8), vgre-
duce(8), lvcreate(8), lvdisplay(8), lvextend(8), lvreduce(8)
Sistina Software UK LVM TOOLS 2.02.111(2) (2014-09-01) VGCREATE(8)
Czas wygenerowania: 0.00047 sek.
Created with the man page lookup class by Andrew Collington.
Based on a C man page viewer by Vadim Pavlov
Unicode soft-hyphen fix (as used by RedHat) by Dan Edwards
Some optimisations by Eli Argon
Caching idea and code contribution by James Richardson
Copyright © 2003-2023 Linux.pl
Hosted by Hosting Linux.pl