Opcje wyszukiwania podręcznika man:
Lista stron man zaczynających się od znaku:
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   ALPHA   NUM   OTHER   ALL
tput(1)                     General Commands Manual                    tput(1)

       tput, reset - initialize a terminal or query terminfo database

       tput [-Ttype] capname [parms ... ]
       tput [-Ttype] init
       tput [-Ttype] reset
       tput [-Ttype] longname
       tput -S  <<
       tput -V

       The  tput utility uses the terminfo database to make the values of ter-
       minal-dependent capabilities and information  available  to  the  shell
       (see  sh(1)),  to  initialize or reset the terminal, or return the long
       name of the requested terminal type.  The result depends upon the capa-
       bility's type:

                   tput writes the string to the standard output.  No trailing
                   newline is supplied.

                   tput writes the decimal value to the standard output,  with
                   a trailing newline.

                   tput  simply sets the exit code (0 for TRUE if the terminal
                   has the capability, 1 for FALSE if it does not), and writes
                   nothing to the standard output.

       Before  using  a value returned on the standard output, the application
       should test the exit code (e.g., $?, see sh(1)) to be  sure  it  is  0.
       (See  the EXIT CODES and DIAGNOSTICS sections.)  For a complete list of
       capabilities and the capname associated with each, see terminfo(5).

       -Ttype indicates the type of terminal.  Normally this option is  unnec-
              essary,  because the default is taken from the environment vari-
              able TERM.  If -T is specified, then the shell  variables  LINES
              and COLUMNS will also be ignored.

              indicates the capability from the terminfo database.  When term-
              cap support is compiled in, the termcap name for the  capability
              is also accepted.

       parms  If  the  capability is a string that takes parameters, the argu-
              ments parms will be instantiated into the string.

              Most parameters are numbers.  Only a few  terminfo  capabilities
              require  string parameters; tput uses a table to decide which to
              pass as strings.  Normally tput uses tparm (3X) to  perform  the
              substitution.   If  no  parameters are given for the capability,
              tput writes the string without performing the substitution.

       -S     allows more than one capability per  invocation  of  tput.   The
              capabilities  must  be  passed  to  tput from the standard input
              instead of from the command line (see example).  Only  one  cap-
              name  is allowed per line.  The -S option changes the meaning of
              the 0 and 1 boolean and string exit codes (see  the  EXIT  CODES

              Again,  tput  uses a table and the presence of parameters in its
              input to decide whether to use tparm (3X), and how to  interpret
              the parameters.

       -V     reports  the  version of ncurses which was used in this program,
              and exits.

       init   If the terminfo database is present and an entry for the  user's
              terminal exists (see -Ttype, above), the following will occur:

              (1)    if present, the terminal's initialization strings will be
                     output as detailed in the terminfo(5) section on Tabs and

              (2)    any delays (e.g., newline) specified in the entry will be
                     set in the tty driver,

              (3)    tabs expansion will be turned on or off according to  the
                     specification in the entry, and

              (4)    if  tabs  are  not  expanded,  standard  tabs will be set
                     (every 8 spaces).

              If an entry does not contain the information needed for  any  of
              the  four  above  activities,  that  activity  will  silently be

       reset  Instead of putting out initialization  strings,  the  terminal's
              reset strings will be output if present (rs1, rs2, rs3, rf).  If
              the reset strings are not present,  but  initialization  strings
              are,  the  initialization  strings  will  be output.  Otherwise,
              reset acts identically to init.

              If the terminfo database is present and an entry for the  user's
              terminal  exists  (see  -Ttype above), then the long name of the
              terminal will be put out.  The long name is the last name in the
              first  line  of the terminal's description in the terminfo data-
              base [see term(5)].

       If tput is invoked by a link named reset, this has the same  effect  as
       tput reset.  See tset for comparison, which has similar behavior.

       tput init
            Initialize  the  terminal according to the type of terminal in the
            environmental variable TERM.  This command should be  included  in
            everyone's .profile after the environmental variable TERM has been
            exported, as illustrated on the profile(5) manual page.

       tput -T5620 reset
            Reset an AT&T 5620 terminal, overriding the type  of  terminal  in
            the environmental variable TERM.

       tput cup 0 0
            Send the sequence to move the cursor to row 0, column 0 (the upper
            left corner of the screen, usually  known  as  the  "home"  cursor

       tput clear
            Echo the clear-screen sequence for the current terminal.

       tput cols
            Print the number of columns for the current terminal.

       tput -T450 cols
            Print the number of columns for the 450 terminal.

       bold=`tput smso` offbold=`tput rmso`
            Set  the  shell  variables bold, to begin stand-out mode sequence,
            and offbold, to end standout mode sequence, for the current termi-
            nal.  This might be followed by a prompt: echo "${bold}Please type
            in your name: ${offbold}\c"

       tput hc
            Set exit code to indicate if the current terminal is a  hard  copy

       tput cup 23 4
            Send the sequence to move the cursor to row 23, column 4.

       tput cup
            Send  the  terminfo string for cursor-movement, with no parameters

       tput longname
            Print the long name from the terminfo database  for  the  type  of
            terminal specified in the environmental variable TERM.

            tput -S <<!
            > clear
            > cup 10 10
            > bold
            > !

            This  example  shows  tput  processing several capabilities in one
            invocation.  It clears the screen, moves the  cursor  to  position
            10,  10 and turns on bold (extra bright) mode.  The list is termi-
            nated by an exclamation mark (!) on a line by itself.

              compiled terminal description database

              tab settings for some terminals, in a format appropriate  to  be
              output  to  the  terminal (escape sequences that set margins and
              tabs); for more information, see the "Tabs  and  Initialization"
              section of terminfo(5)

       If the -S option is used, tput checks for errors from each line, and if
       any errors are found, will set the exit code to 4 plus  the  number  of
       lines  with  errors.   If  no errors are found, the exit code is 0.  No
       indication of which line failed can be given so exit code 1 will  never
       appear.   Exit codes 2, 3, and 4 retain their usual interpretation.  If
       the -S option is not used, the exit code depends on the  type  of  cap-

                   a value of 0 is set for TRUE and 1 for FALSE.

            string a value of 0 is set if the capname is defined for this ter-
                   minal type (the value of capname is  returned  on  standard
                   output);  a value of 1 is set if capname is not defined for
                   this terminal type (nothing is written to standard output).

                   a value of 0 is always  set,  whether  or  not  capname  is
                   defined for this terminal type.  To determine if capname is
                   defined for this terminal type,  the  user  must  test  the
                   value written to standard output.  A value of -1 means that
                   capname is not defined for this terminal type.

            other  reset or init may fail to find their respective files.   In
                   that case, the exit code is set to 4 + errno.

       Any other exit code indicates an error; see the DIAGNOSTICS section.

       tput  prints  the  following  error messages and sets the corresponding
       exit codes.

       exit code   error message
       0           (capname is a numeric variable that is not specified  in
                   the  terminfo(5)  database  for this terminal type, e.g.
                   tput -T450 lines and tput -T2621 xmc)
       1           no error message is printed, see the EXIT CODES section.
       2           usage error
       3           unknown terminal type or no terminfo database
       4           unknown terminfo capability capname
       >4          error occurred in -S

       The longname and -S options, and  the  parameter-substitution  features
       used in the cup example, are not supported in BSD curses or in AT&T/USL
       curses before SVr4.

       X/Open documents only the operands for clear, init and reset.  In  this
       implementation,  clear is part of the capname support.  Other implemen-
       tations of tput on SVr4-based systems such as Solaris, IRIX64 and  HPUX
       as well as others such as AIX and Tru64 provide support for capname op-

       A few platforms such as FreeBSD  and  NetBSD  recognize  termcap  names
       rather  than  terminfo  capability  names in their respective tput com-

       Most implementations which provide support for capname operands use the
       tparm  function  to  expand  parameters in it.  That function expects a
       mixture of numeric and string parameters, requiring tput to know  which
       type  to  use.   This implementation uses a table to determine that for
       the standard capname operands, and an internal library function to ana-
       lyze  nonstandard  capname  operands.  Other implementations may simply
       guess that an operand containing only digits is intended to be  a  num-

       clear(1), stty(1), tabs(1), terminfo(5), termcap(3NCURSES).

       This describes ncurses version 5.9 (patch 20140913).


Czas wygenerowania: 0.00054 sek.

Created with the man page lookup class by Andrew Collington.
Based on a C man page viewer by Vadim Pavlov
Unicode soft-hyphen fix (as used by RedHat) by Dan Edwards
Some optimisations by Eli Argon
Caching idea and code contribution by James Richardson

Copyright © 2003-2023
Hosted by Hosting