AGETTY(8) System Administration AGETTY(8)
NAME
agetty - alternative Linux getty
SYNOPSIS
agetty [options] port [baud_rate...] [term]
DESCRIPTION
agetty opens a tty port, prompts for a login name and invokes the
/bin/login command. It is normally invoked by init(8).
agetty has several non-standard features that are useful for hardwired
and for dial-in lines:
o Adapts the tty settings to parity bits and to erase, kill, end-
of-line and uppercase characters when it reads a login name.
The program can handle 7-bit characters with even, odd, none or
space parity, and 8-bit characters with no parity. The follow-
ing special characters are recognized: Control-U (kill); DEL and
backspace (erase); carriage return and line feed (end of line).
See also the --erase-chars and --kill-chars options.
o Optionally deduces the baud rate from the CONNECT messages pro-
duced by Hayes(tm)-compatible modems.
o Optionally does not hang up when it is given an already opened
line (useful for call-back applications).
o Optionally does not display the contents of the /etc/issue file.
o Optionally displays an alternative issue files or directories
instead of /etc/issue or /etc/issue.d.
o Optionally does not ask for a login name.
o Optionally invokes a non-standard login program instead of
/bin/login.
o Optionally turns on hardware flow control.
o Optionally forces the line to be local with no need for carrier
detect.
This program does not use the /etc/gettydefs (System V) or /etc/get-
tytab (SunOS 4) files.
ARGUMENTS
port A path name relative to the /dev directory. If a "-" is speci-
fied, agetty assumes that its standard input is already con-
nected to a tty port and that a connection to a remote user has
already been established.
Under System V, a "-" port argument should be preceded by a
"--".
baud_rate,...
A comma-separated list of one or more baud rates. Each time
agetty receives a BREAK character it advances through the list,
which is treated as if it were circular.
Baud rates should be specified in descending order, so that the
null character (Ctrl-@) can also be used for baud-rate switch-
ing.
This argument is optional and unnecessary for virtual terminals.
The default for serial terminals is keep the current baud rate
(see --keep-baud) and if unsuccessful then default to '9600'.
term The value to be used for the TERM environment variable. This
overrides whatever init(8) may have set, and is inherited by lo-
gin and the shell.
The default is 'vt100', or 'linux' for Linux on a virtual termi-
nal, or 'hurd' for GNU Hurd on a virtual terminal.
OPTIONS
-8, --8bits
Assume that the tty is 8-bit clean, hence disable parity detec-
tion.
-a, --autologin username
Automatically log in the specified user without asking for a
username or password. Using this option causes an -f username
option and argument to be added to the /bin/login command line.
See --login-options, which can be used to modify this option's
behavior.
Note that --autologin may affect the way how agetty initializes
the serial line, because on auto-login agetty does not read from
the line and it has no opportunity optimize the line setting.
-c, --noreset
Do not reset terminal cflags (control modes). See termios(3)
for more details.
-E, --remote
Typically the login(1) command is given a remote hostname when
called by something such as telnetd(8). This option allows
agetty to pass what it is using for a hostname to login(1) for
use in utmp(5). See --host, login(1), and utmp(5).
If the --host fakehost option is given, then an -h fakehost op-
tion and argument are added to the /bin/login command line.
If the --nohostname option is given, then an -H option is added
to the /bin/login command line.
See --login-options.
-f, --issue-file path
Specifies a ":" delimited list of files and directories to be
displayed instead of /etc/issue (or other). All specified files
and directories are displayed, missing or empty files are
silently ignored. If the specified path is a directory then
display all files with .issue file extension in version-sort or-
der from the directory. This allows custom messages to be dis-
played on different terminals. The --noissue option will over-
ride this option.
--show-issue
Display the current issue file (or other) on the current termi-
nal and exit. Use this option to review the current setting, it
is not designed for any other purpose. Note that output may use
some default or incomplete information as proper output depends
on terminal and agetty command line.
-h, --flow-control
Enable hardware (RTS/CTS) flow control. It is left up to the
application to disable software (XON/XOFF) flow protocol where
appropriate.
-H, --host fakehost
Write the specified fakehost into the utmp file. Normally, no
login host is given, since agetty is used for local hardwired
connections and consoles. However, this option can be useful
for identifying terminal concentrators and the like.
-i, --noissue
Do not display the contents of /etc/issue (or other) before
writing the login prompt. Terminals or communications hardware
may become confused when receiving lots of text at the wrong
baud rate; dial-up scripts may fail if the login prompt is pre-
ceded by too much text.
-I, --init-string initstring
Set an initial string to be sent to the tty or modem before
sending anything else. This may be used to initialize a modem.
Non-printable characters may be sent by writing their octal code
preceded by a backslash (\). For example, to send a linefeed
character (ASCII 10, octal 012), write \012.
-J, --noclear
Do not clear the screen before prompting for the login name. By
default the screen is cleared.
-l, --login-program login_program
Invoke the specified login_program instead of /bin/login. This
allows the use of a non-standard login program. Such a program
could, for example, ask for a dial-up password or use a differ-
ent password file. See --login-options.
-L, --local-line[=mode]
Control the CLOCAL line flag. The optional mode argument is
'auto', 'always' or 'never'. If the mode argument is omitted,
then the default is 'always'. If the --local-line option is not
given at all, then the default is 'auto'.
always Forces the line to be a local line with no need for car-
rier detect. This can be useful when you have a locally
attached terminal where the serial line does not set the
carrier-detect signal.
never Explicitly clears the CLOCAL flag from the line setting
and the carrier-detect signal is expected on the line.
auto The agetty default. Does not modify the CLOCAL setting
and follows the setting enabled by the kernel.
-m, --extract-baud
Try to extract the baud rate from the CONNECT status message
produced by Hayes(tm)-compatible modems. These status messages
are of the form: "<junk><speed><junk>". agetty assumes that the
modem emits its status message at the same speed as specified
with (the first) baud_rate value on the command line.
Since the --extract-baud feature may fail on heavily-loaded sys-
tems, you still should enable BREAK processing by enumerating
all expected baud rates on the command line.
--list-speeds
Display supported baud rates. These are determined at compila-
tion time.
-n, --skip-login
Do not prompt the user for a login name. This can be used in
connection with the --login-program option to invoke a non-stan-
dard login process such as a BBS system. Note that with the
--skip-login option, agetty gets no input from the user who logs
in and therefore will not be able to figure out parity, charac-
ter size, and newline processing of the connection. It defaults
to space parity, 7 bit characters, and ASCII CR (13) end-of-line
character. Beware that the program that agetty starts (usually
/bin/login) is run as root.
-N, --nonewline
Do not print a newline before writing out /etc/issue.
-o, --login-options "login_options"
Options and arguments that are passed to login(1). Where \u is
replaced by the login name. For example:
--login-options '-h darkstar -- \u'
See --autologin, --login-program and --remote.
Please read the SECURITY NOTICE below before using this option.
-p, --login-pause
Wait for any key before dropping to the login prompt. Can be
combined with --autologin to save memory by lazily spawning
shells.
-r, --chroot directory
Change root to the specified directory.
-R, --hangup
Call vhangup() to do a virtual hangup of the specified terminal.
-s, --keep-baud
Try to keep the existing baud rate. The baud rates from the
command line are used when agetty receives a BREAK character.
If another baud rates specified then the original baud rate is
also saved to the end of the wanted baud rates list. This can
be used to return to the original baud rate after unexpected
BREAKs.
-t, --timeout timeout
Terminate if no user name could be read within timeout seconds.
Use of this option with hardwired terminal lines is not recom-
mended.
-U, --detect-case
Turn on support for detecting an uppercase-only terminal. This
setting will detect a login name containing only capitals as in-
dicating an uppercase-only terminal and turn on some upper-to-
lower case conversions. Note that this has no support for any
Unicode characters.
-w, --wait-cr
Wait for the user or the modem to send a carriage-return or a
linefeed character before sending the /etc/issue file (or oth-
ers) and the login prompt. This is useful with the
--init-string option.
--nohints
Do not print hints about Num, Caps and Scroll Locks.
--nohostname
By default the hostname will be printed. With this option en-
abled, no hostname at all will be shown.
--long-hostname
By default the hostname is only printed until the first dot.
With this option enabled, the fully qualified hostname by geth-
ostname(3P) or (if not found) by getaddrinfo(3) is shown.
--erase-chars string
This option specifies additional characters that should be in-
terpreted as a backspace ("ignore the previous character") when
the user types the login name. The default additional 'erase'
has been '#', but since util-linux 2.23 no additional erase
characters are enabled by default.
--kill-chars string
This option specifies additional characters that should be in-
terpreted as a kill ("ignore all previous characters") when the
user types the login name. The default additional 'kill' has
been '@', but since util-linux 2.23 no additional kill charac-
ters are enabled by default.
--chdir directory
Change directory before the login.
--delay number
Sleep seconds before open tty.
--nice number
Run login with this priority.
--reload
Ask all running agetty instances to reload and update their dis-
played prompts, if the user has not yet commenced logging in.
After doing so the command will exit. This feature might be un-
supported on systems without Linux inotify(7).
--version
Display version information and exit.
--help Display help text and exit.
EXAMPLE
This section shows examples for the process field of an entry in the
/etc/inittab file. You'll have to prepend appropriate values for the
other fields. See inittab(5) for more details.
For a hardwired line or a console tty:
/sbin/agetty 9600 ttyS1
For a directly connected terminal without proper carrier-detect wiring
(try this if your terminal just sleeps instead of giving you a pass-
word: prompt):
/sbin/agetty --local-line 9600 ttyS1 vt100
For an old-style dial-in line with a 9600/2400/1200 baud modem:
/sbin/agetty --extract-baud --timeout 60 ttyS1 9600,2400,1200
For a Hayes modem with a fixed 115200 bps interface to the machine (the
example init string turns off modem echo and result codes, makes mo-
dem/computer DCD track modem/modem DCD, makes a DTR drop cause a dis-
connection, and turns on auto-answer after 1 ring):
/sbin/agetty --wait-cr --init-string 'ATE0Q1&D2&C1S0=1 15' 115200 ttyS1
SECURITY NOTICE
If you use the --login-program and --login-options options, be aware
that a malicious user may try to enter lognames with embedded options,
which then get passed to the used login program. Agetty does check for
a leading "-" and makes sure the logname gets passed as one parameter
(so embedded spaces will not create yet another parameter), but depend-
ing on how the login binary parses the command line that might not be
sufficient. Check that the used login program cannot be abused this
way.
Some programs use "--" to indicate that the rest of the command line
should not be interpreted as options. Use this feature if available by
passing "--" before the username gets passed by \u.
ISSUE FILES
The default issue file is /etc/issue. If the file exists then agetty
also checks for /etc/issue.d directory. The directory is optional ex-
tension to the default issue file and content of the directory is
printed after /etc/issue content. If the /etc/issue does not exist than
the directory is ignored. All files with .issue extension from the di-
rectory are printed in version-sort order. The directory can be used to
maintain 3rd-party messages independently on the primary system
/etc/issue file.
Since version 2.35 additional locations for issue file and directory
are supported. If the default /etc/issue does not exist than agetty
checks for /run/issue and /run/issue.d, thereafter for /usr/lib/issue
and /usr/lib/issue.d. The directory /etc is expected for host specific
configuration, /run is expected for generated stuff and /usr/lib for
static distribution maintained configuration.
The default path maybe overridden by --issue-file option. In this case
specified path has to be file or directory and all the default issue
file and directory locations are ignored.
The issue file feature is possible to completely disable by --noissue
option.
It is possible to review the current issue file by agetty --show-issue
on the current terminal.
The issue files may contain certain escape codes to display the system
name, date, time et cetera. All escape codes consist of a backslash
(\) immediately followed by one of the characters listed below.
4 or 4{interface}
Insert the IPv4 address of the specified network interface (for
example: \4{eth0}). If the interface argument is not specified,
then select the first fully configured (UP, non-LOCALBACK, RUN-
NING) interface. If not any configured interface is found, fall
back to the IP address of the machine's hostname.
6 or 6{interface}
The same as \4 but for IPv6.
b Insert the baudrate of the current line.
d Insert the current date.
e or e{name}
Translate the human-readable name to an escape sequence and in-
sert it (for example: \e{red}Alert text.\e{reset}). If the name
argument is not specified, then insert \033. The currently sup-
ported names are: black, blink, blue, bold, brown, cyan, dark-
gray, gray, green, halfbright, lightblue, lightcyan, lightgray,
lightgreen, lightmagenta, lightred, magenta, red, reset, re-
verse, yellow and white. All unknown names are silently ig-
nored.
s Insert the system name (the name of the operating system). Same
as 'uname -s'. See also the \S escape code.
S or S{VARIABLE}
Insert the VARIABLE data from /etc/os-release. If this file
does not exist then fall back to /usr/lib/os-release. If the
VARIABLE argument is not specified, then use PRETTY_NAME from
the file or the system name (see \s). This escape code can be
used to keep /etc/issue distribution and release independent.
Note that \S{ANSI_COLOR} is converted to the real terminal es-
cape sequence.
l Insert the name of the current tty line.
m Insert the architecture identifier of the machine. Same as 'un-
ame -m'.
n Insert the nodename of the machine, also known as the hostname.
Same as 'uname -n'.
o Insert the NIS domainname of the machine. Same as 'hostname
-d'.
O Insert the DNS domainname of the machine.
r Insert the release number of the OS. Same as 'uname -r'.
t Insert the current time.
u Insert the number of current users logged in.
U Insert the string "1 user" or "<n> users" where <n> is the num-
ber of current users logged in.
v Insert the version of the OS, that is, the build-date and such.
An example. On my system, the following /etc/issue file:
This is \n.\o (\s \m \r) \t
displays as:
This is thingol.orcan.dk (Linux i386 1.1.9) 18:29:30
FILES
/var/run/utmp
the system status file.
/etc/issue
printed before the login prompt.
/etc/os-release /usr/lib/os-release
operating system identification data.
/dev/console
problem reports (if syslog(3) is not used).
/etc/inittab
init(8) configuration file for SysV-style init daemon.
BUGS
The baud-rate detection feature (the --extract-baud option) requires
that agetty be scheduled soon enough after completion of a dial-in call
(within 30 ms with modems that talk at 2400 baud). For robustness, al-
ways use the --extract-baud option in combination with a multiple baud
rate command-line argument, so that BREAK processing is enabled.
The text in the /etc/issue file (or other) and the login prompt are al-
ways output with 7-bit characters and space parity.
The baud-rate detection feature (the --extract-baud option) requires
that the modem emits its status message after raising the DCD line.
DIAGNOSTICS
Depending on how the program was configured, all diagnostics are writ-
ten to the console device or reported via the syslog(3) facility. Er-
ror messages are produced if the port argument does not specify a ter-
minal device; if there is no utmp entry for the current process (System
V only); and so on.
AUTHORS
Werner Fink <werner@suse.de>
Karel Zak <kzak@redhat.com>
The original agetty for serial terminals was written by W.Z. Venema
<wietse@wzv.win.tue.nl> and ported to Linux by Peter Orbaek
<poe@daimi.aau.dk>.
AVAILABILITY
The agetty command is part of the util-linux package and is available
from https://www.kernel.org/pub/linux/utils/util-linux/.
util-linux February 2016 AGETTY(8)
Czas wygenerowania: 0.00049 sek.
Created with the man page lookup class by Andrew Collington.
Based on a C man page viewer by Vadim Pavlov
Unicode soft-hyphen fix (as used by RedHat) by Dan Edwards
Some optimisations by Eli Argon
Caching idea and code contribution by James Richardson
Copyright © 2003-2025 Linux.pl
Hosted by Hosting Linux.pl